Configuring the Cisco Nexus 1000V Training (DCNX1K) Course with hands-on Labs – Cisco Learning Credits: 43 CLC
The Securing Cisco Networks with Threat Detection and Analysis Training (SCYBER) (v1.2) combines lecture materials and hands-on labs throughout to make sure you are able to understand cybersecurity concepts and recognize specific network threats and attacks. You will learn how a network security operations center (SOC) works and how to begin to monitor, analyze, and respond to security threats within the network.
This lab-intensive training course prepares you to take the Cyber Security Specialist Certification exam (exam ID = 600-199).
Duration: 5 days
- Interconnecting Cisco Network Devices Part 1 Training (ICND1) (v3.0)
- Interconnecting Cisco Network Devices Part 2 Training (ICND2) (v3.0)
- Interconnecting Cisco Network Devices: Accelerated Training (CCNAX) (v3.0)
- Configuring Data Center Unified Computing Training (DCUCS) (v3.0)
- Introducing Cisco Data Center Networking Training (DCICN) (v6.2)
- Introducing Cisco Data Center Technologies Training (DCICT) (v6.2)
- Implementing Cisco Data Center Unified Computing Training (DCUCI) (v6.2)
- Implementing Cisco Data Center Infrastructure Training (DCII) (v6.2)
- Implementing Cisco Data Center Virtualization and Automation Training (DCVAI) (v6.2)
- Designing Cisco Data Center Infrastructure Training (DCID) (v6.2)
- Troubleshooting Cisco Data Center Infrastructure Training (DCIT) (v6.2)
- Splunk Enterprise for Cisco Networks Training (SPLUNK)
- Configuring Cisco Nexus 9000 Series Switches in ACI Mode Training (DCAC9K)
- Introducing Cisco Nexus 9000 Switches in NX-OS Mode Training (DCINX9K)
- Configuring Cisco Nexus 7000 Switches Training (DCNX7K)
- Configuring Cisco Nexus 5000 Switches Training (DCNX5K)
- Configuring the Cisco Nexus 1000V Training (DCNX1K)
- Securing Cisco Networks with Threat Detection and Analysis Training (SCYBER) (v1.2)
- Implementing Cisco Edge Network Security Solutions Training (SENSS)
- Implementing and Configuring Cisco Identity Services Engine Training (SISE) (v2.3)
- Implementing Cisco Secure Mobility Solutions Training (SIMOS) (v1.0)
- Implementing Cisco Secure Access Solutions Training (SISAS) (v1.0)
- Implementing Cisco Threat Control Solutions Training (SITCS) (v1.5)
- Implementing Cisco Network Security Training (IINS) (v3.0)
- Implementing Cisco Cybersecurity Operations Training (SECOPS) (v1.0)
• If you are familiar with some aspects of this Securing Cisco Networks with Threat Detection and Analysis Training (SCYBER) course, we can omit or shorten their discussion.
• We can adjust the emphasis placed on the various topics or build the Securing Cisco Networks with Threat Detection and Analysis Training (SCYBER) course around the mix of technologies of interest to you (including technologies other than those included in this outline).
• If your background is nontechnical, we can exclude the more technical topics, include the topics that may be of special interest to you (e.g., as a manager or policy-maker), and present the Securing Cisco Networks with Threat Detection and Analysis Training (SCYBER) course in manner understandable to lay audiences.
Audience / Target Group:
The target audience for this Securing Cisco Networks with Threat Detection and Analysis Training (SCYBER) course is defined here:
• This Securing Cisco Networks with Threat Detection and Analysis Training (SCYBER) (v1.2) course is designed for technical professionals who need to know how to monitor, analyze, and respond to network security threats and attacks.
The knowledge and skills that a learner must have before attending this Securing Cisco Networks with Threat Detection and Analysis Training (SCYBER) course are:
• CCNA equivalent knowledge is preferred
• Basic understanding of Cisco security product features
• Basic understanding of open-source and commercial network security tools
• Basic understanding of Microsoft Windows and UNIX/Linux operating systems, desktops, and servers
• Basic understanding of the Open Systems Interconnection (OSI) model and TCP/IP
After completing this Securing Cisco Networks with Threat Detection and Analysis Training (SCYBER) course, attendees will be able to:
• Describe the tools, techniques, and thought processes of an attacker.
• Describe the features, functions, and benefits of an SOC.
• Identify the common sources used to detect an incident, as well as the actions that should be considered in response.
• Perform basic packet capture and packet analysis.
• Enable syslog on Cisco devices and to perform basic network log analysis.
• Discuss the relevance of baselining and some of the most useful steps to be used when deploying a system.
• Discuss the policies and roles in the typical SOC, as well as some of the common tools used by SOC members.
• Discuss techniques used to identify anomalies and correlate log entries.
• Understand techniques used to scope, document, and analyze investigations.
• Discuss the methodology behind mitigations.
• Discuss documentation and communication during an incident.
• Discuss post-incident considerations.
Securing Cisco Networks with Threat Detection and Analysis Training (SCYBER) – Course Outline:
Module 1: Attacker Methodology
Types of Attackers
Malware and attacker tools
Understand common attacks
Module 2: Defender Methodology
Define vulnerabilities, threats, exploits, and attacks
Define the network (NOC) and security operations center (SOC)
SOC processes and procedures
Responsibilities of the SOC
Identify security incidents
Module 3: Defender Tools
Identify common sources used to detect security incidents
Understand event correlation and baseline data
Define data across layers of TCP/IP model
Data synchronization and data collection
Network monitoring and event management
Risk analysis and mitigation strategies
Module 4: Packet Analysis
Network structures related to packet analysis
Analyze packets using Cisco IOS software
Access control lists
IOS embedded packet capture (EPC)
Methods used to capture traffic
Conduct network traces
Establish a packet baseline using Wireshark
Module 5: Network Log Analysis
Use log analysis protocols and tools
Explore log mechanics
Retrieve syslog data
Retrieve DNS events and proxy logs
Correlate log files
Module 6: Baseline Network Operations
Establish a network baseline
Exception handling and monitoring tools
Network topology mapping
Network securing best practices
Define and identify mission-critical business components
Determine the health state of monitored network components
Module 7: Incident Response Preparation
SOC roles and responsibilities
Incident response standards
IRT roles and responsibilities
Remediation, resolution and closure
Establish an effective monitoring system
Analyze monitoring system
Module 8: Security Incident Detection
Identify an incident
Correlate data sources
SIEM as an automatic correlation
Review and classify incident information
Identify source of incident
Module 9: Investigations
Framework and scope of investigation
Data collection process
Describe the role of flow data in an investigation
Use flow data to monitor, analyze, and visualize network traffic
Module 10: Mitigations and Best Practices
Development and deployment
Validate and test mitigations
Proper documentation methods
Describe cyber threat defense solutions and components
Implement access control lists (ACLs)
Zone-based policy firewall overview
Describe default policies, traffic flows, and zone Interaction
Implement network-layer mitigations and best practices
Implement link-layer best practices
Module 11: Communication
Incident documentation requirements and process
Module 12: Post-Event Activity
Conduct an incident post-mortem
Policies and procedures
Develop security proposals
Implement, publicize and monitor remediations
Securing Cisco Networks with Threat Detection and Analysis Training (SCYBER) – Labs:
Assessing Your Understanding of Network and Security Operations
Exploring the Remote Lab Environment
Enabling Netflow Export and Syslog
Capturing Packets on the Pod Router and using Wireshark to examine the PCAP
Capturing Packets using TCPDUMP
Examining Logs Manually
Enabling AAA for Router SSH Management Access
Enabling SMNPv3 on the Pod Router and Pod Switch
Performing NMAP Scans and Using Netcat to Connect to Open Ports
Analyzing PCAP File with Suspicious Activities Using Wireshark
Examining Event Logs Manually
Examining Event Logs Using Splunk
Analyzing NetFlow Data with Lancope StealthWatch
Implementing IOS Zone-Based Firewall
Whether you are looking for general information or have a specific question, we want to help!
Request More Information